What to do if the drawing does not match the frame?
Thread Content
What to do if the drawing does not match the frame? Thank you for your advice. The drawing is a bit too large to fit within the frame; how can I adjust it? The drawing is slightly larger than my frame, so it simply won’t fit in. How can I make the frame larger? This post was last edited by brightness22 on 2009-2-7 12:06.]
How to adjust the picture frame? Please advise, experts
It's simple! In CAD, you either need to reduce the size of the drawing or enlarge the drawing frame! It is better to have a plan view or a piping layout; enlarge the drawing frame, as such drawings are usually drawn at a 1:1 scale!
The drawing frame should be scaled, but when the scaling factor is too large, it is necessary to adjust the font size and the overall scale of the annotations to ensure that the drawing remains clear
Hasn’t my title bar changed too?
Tabs and material lists should be scaled together with the image frame, and the font size in the image as well as the text size of the annotations should be roughly the same as those in the material list. This is done to ensure the printing quality.
I’m a beginner in CAD; I hope everyone can give me some advice. The original scale of the drawing was 1:1, but the drawing frame has been enlarged by 5 times, and the font size in the legend has also increased by 5 times, which results in a poor visual balance with the drawing. How can I adjust the drawing frame? Thank you for your advice
The drawing has been extended~. Or use a larger image; otherwise, when scaling is applied, the overall proportions will change~:L
It’s possible to extend the drawing and divide it into sections.
The poster shouldn’t use zoom; they just need to extend the image frame
The image frame returns to its original state, that is, it is reduced by a factor of 5； The drawing is also reduced by a factor of 5, with a scale of 1:5. The text and annotations in the drawing can be adjusted to the size required for printing; this can be done quickly using the format brush. It is best to develop the habit of drawing according to frames and proportions.
It depends on what picture you’re looking at. If the content of the drawing cannot be changed, that is, it’s not possible to split it into separate parts or arrange it more compactly, then the drawing frame needs to be adjusted. At this point, it depends on how much the difference is between the drawing frame and the content of the drawing. Either scale the frame or choose an extended frame. (These two options depend on the content of your drawing.) If the content is extensive but the height is just right, then choose an extended drawing frame. (The same principle applies to vertical extended picture frames.) If the content is both wide and long (compared to the frame), then scale the frame. (The horizontal) extension of the frame is such that the distance added each time is 1/4 of the frame’s height. Actually, if you’re in a reputable design firm, there should be standard extended drawing frames available. Since the details you provided are not specific enough, that’s all I can say. I hope this can solve your problem.
If the image is too large, you can enlarge the image frame by a certain factor or reduce it by a certain factor; just adjust the scale when printing； If the image posted by the original poster is only longer in the length direction than the image frame, then consider using an extended image frame. There are also standards for such extended frames; you can look them up (I don’t have any available on hand right now, sorry:P)