Centrifuge usage issues
Thread Content
As we all know, the centrifuge needs to prime the pump before use.； I now have a tank of material slurry with a volume of 7 cubic meters and a height of 6 meters from the centrifugal pump. Now open the inlet and outlet valves of the centrifugal pump to fill the pump. ； In addition, there is an empty tank with a volume of 5 cubic meters at a height of 6 meters in the centrifugal pump pipeline, but the outlet of the tank is closed. ； I would like to ask, is there still some air in the centrifugal pump that has not been discharged? This post was last edited by lxzzl on 2009-2-9 09:23 ]
Follow the starting steps of the pump, close the outlet valve, open the exhaust valve and fully exhaust.
Before priming the pump, close the outlet valve of the pump, open the outlet valve of the empty tank, and then prime the pump to discharge the air in the pump.
The title should be about the problem of centrifugal pumps, which are two different concepts from centrifuges. I thought it was really a problem of centrifuges: L
:L Another one, I also thought it was a problem with the centrifuge. The two are completely different:L :L