What is the appropriate water flow rate for the cold water insulation of the crystallization tank and alcohol settling tank?
Thread Content
The function of the cold water in the crystallization tank and alcohol settling tank is to maintain low temperature. Can the cold water flow rate be slower? The general economic flow rate is 0.9-1.4 meters/s.
The data I found is 0.9-1.4m/s. Is the hot water 1 meter/s? The pipe diameter is large and the flow rate can be faster. Why?
I don't know which flow rate you are referring to, the flow rate in the inlet and outlet pipes or the flow rate in the jacket. For example, the inlet and outlet pipes can be 1~3m/s, but the flow velocity in the jacket is very small. Even if a deflector is installed, the maximum cannot reach 1m/s.
For example, the inlet and outlet pipes can be 1~3m/s, but the flow velocity in the jacket is very small. Even if a deflector is installed, the maximum cannot reach 1m/s. Thank you. It turns out that I don’t have much knowledge about chemical machinery and equipment.