How to connect butt welding flange and pipe hoop
Thread Content
I would like to ask how to connect the butt welding flange and single socket pipe hoop? Do I need a short pipe or a direct connection?
How to connect directly? ? ? Unless the poster is a god! Add a short circuit. Weld flanges and clamps at both ends of the short circuit and then connect them to the pipe! Of course, the length of the short-circuit is at least sufficient to disassemble and install the bolts on the flange end and the clamp on the other end!
Based on your question, I speculated whether this should be the case: Lead a branch pipe (single socket pipe clamp) from the main pipe, and then consider adding a flange connection. The end face of the single-socket pipe hoop is socket welded, and the butt welding flange needs to be butt welded, and a short pipe should be added in the middle. If you do not want to add a short pipe, it is recommended to change the pipe clamp to BOSS
I agree with the third floor's point of view. It seems that Huhu is a beginner. This is the basic knowledge of piping.
In harsh environments, such as high-pressure explosion sites, short pipes should be connected with butt welding flanges and single-socket pipe hoops.； Can be connected directly in general situations