Where should one start learning chemical engineering design?

If you go to a design institute, they will provide you with a set of materials for learning; but if you haven’t started preparing yet, the foundation is the principles of chemical engineering. The standard references are the chemical engineering design manual, as well as the standards for pipeline installation.

You can first take a look at Introduction to Chemical Engineering Design, compiled by Hu Qingfu and published by China Science and Technology Press

Start with the two volumes of the \"Chemical Process Design Manual\" and \"Principles of Chemical Engineering\", as well as the projects that have been undertaken by previous design institutes.

First, review the principles of chemical engineering once more*, then check the company’s established rules. If you have time, take a look at the \"Chemical Process Handbook\". The most important thing is to learn through actual work, and ask your experienced colleagues to explain things to you more.

Are you going to the design institute to work on processes or piping? If it involves process engineering, one needs to review basic knowledge such as principles of chemical engineering, understand and become familiar with the standards and regulations related to the process, and then consult chemical engineering design manuals. If it’s about piping, then take a closer look at the pipeline installation standards. If you have already joined an engineering design institute, you need to first study the various management documents there*. Find a good mentor, work on projects, and learn patiently by doing things step by step. This post was last edited by fanxh on 2009-2-11 09:57.]

The topic raised by the original poster is quite broad, and it’s difficult to come up with a clear answer. Everyone, please share your thoughts. Based on my experience in design, those who are new to this industry should start by familiarizing themselves with the standard regulations. They should also consult experienced professionals to learn about the regulations that are commonly used in their field of work, so as to become acquainted with them first. Secondly, experience is very important, and it encompasses many different aspects. I believe the original poster has a significant advantage in this regard – with six years of work experience in chemical plants, they must have a thorough understanding of the field. Compared to recent graduates with bachelor’s or master’s degrees, this is a valuable intangible asset, so they should be able to get up to speed quite quickly. Another important aspect is experience in design; with each project completed, one gains a lot of knowledge, and over time this leads to qualitative improvements. Really, there’s no need to rush; take your time.

Study Chemical Engineering Principles, published by Tianjin University. Then learn Reaction Engineering and Chemical Engineering Thermodynamics to gain a basic understanding, and subsequently study Chemical Engineering Design in depth. These subjects help develop the right way of thinking; when it comes to actual design work, various manuals and standards are extremely useful. It’s best to go through a specific example

Thank you all; it’s been very rewarding. Thank you

\"Chemical Process Design Manual\" and specifications