The amount of smoke coming from the chimney of the sulfur plant
Thread Content
Before the sulfur plant was in operation, there was a lot of smoke coming out of the chimney; recently, however, less smoke has been emitted from it. What is the reason for this? Does anyone know?
The main reasons for smoke coming from chimneys are as follows: First, the gas components in the incinerator suddenly become denser, and inadequate air supply often leads to the emission of black smoke； Furthermore, when acidic gases suddenly contain oil or hydrocarbons, inadequate air supply to the reaction furnace leads to combustion in the rear section, usually resulting in yellow smoke ； Finally, if peroxide combustion occurs, a large amount of SO2 is produced, and at this time the chimney will emit white smoke.
It seems like no smoke was coming out of the exhaust when it was running! When it’s not working, there will be white smoke. After working on this for a long time, the operators in the team are very familiar with it – they know what color the smoke is and what situation it indicates. Observe more! Everything has been said thoroughly upstairs.
What color is the cigarette? If it is white, it has a significant impact on the relationship between atmospheric temperature and flue gas temperature. As the smoke exits the chimney and comes into contact with the atmosphere, cooling down, the water vapor turns into small water droplets; as a result, it appears as though much more smoke is coming out of the chimney. A while back the temperatures were low, but with the arrival of spring and rising temperatures, the smoke coming from chimneys seems much less dense.
Study*:) :call: :call: :call:
White smoke is not the same as white vapor. White smoke is usually caused by SO2 emitted from chimneys, and this kind of smoke stretches far into the air. White steam generally appears only in winter when the temperature is below -10°C, and it lasts for a short time.
It’s bad enough to have yellow smoke; the operation is completely terrible
If the temperature of your chimney doesn’t change, it’s due to cold or hot weather; if it does change, then you need to check for other possible causes