Traffic calculation
Thread Content
There is a project that requires measuring gas flow rate; currently, there is an vortex flow meter available: flow rate of 70 M3/h, with water as the medium； Pressure transmitter: 0~1.0 MPa and temperature sensing elements. Now, I need to measure the flow rate in a pipeline; how can this be done and calculated? Thank you!
1. What is the pressure of the gas? Does it exceed your existing pressure transmitter? 2. A Pt100 thermistor is required for temperature compensation. 3. A flow accumulation meter is needed. 4. The selection parameters of the vortex flowmeter must meet the requirements of the operating conditions. 5. If a DCS system is available, the flow accumulator can be omitted, and the flow accumulation calculation can be performed directly in the DCS.
Check the sample to find out what range of gases it can measure at the corresponding diameter; if temperature and pressure compensation is required, a pressure transmitter is also needed.