Please explore energy-saving technologies that make use of waste heat and pressure
Thread Content
In chemical production, some waste heat and pressure are often overlooked. If it is put to use, it could have unexpected effects. For example, our factory uses hydraulic turbines to recover excess pressure, which allows us to save 500 kWh of electricity per hour, resulting in an annual savings of 4 million kWh. Please discuss the application of waste heat and waste pressure energy-saving technologies by referring to practical production examples. Perhaps, through the introduction of a fellow sea traveler, you will be inspired and receive unexpected help.
Our system uses the condensate from steam processes at 1, 2Mpa directly in the deaeration tank to produce deionized water for use in waste heat boilers; 14 T/h of water is reused each hour, resulting in a savings of 1.5 T/h of steam. 2. The condensate from the 22 T/h process and the turbine condensate from the 58 T/h process are sent back to the plant’s condensate network for reuse as demineralized water.
Our factory utilizes the waste heat from the pre-cooler to replace steam heating in the plant. It’s running well now