Thread Content
1. First, unzip the downloaded file to the disk. 2. Configure the crack patch file (ptc_licfile). 3. Click Start – Run. 4. Enter cmd. 5. In the command line, type ipconfig -all. 6. Right-click on the local machine’s MAC address and select Copy using the Enter key. It is the same as the number in the lower left corner of step 13: 7. 8. Right-click on the ptc_licfile file inside the SHooTERS folder to unzip it, and select the option to open it. 9. Choose Notepad to open the file. 10. Select the Replace option under Edit. 11. Replace the original 00－00－00－00 with the Mac serial number you copied earlier; select \"Replace All\", then save and exit. 12. That’s it – the cracking process is now complete. Double-click the setup file in the extracted folder to start the installation. There should be no Chinese characters in that directory. 13. Select “Next”. 14. Accept the terms. 15. Since there is no need to install a server, select the second option, Pro/Engineer. 16. The default settings are fine; you can change the directory and install it in whatever location you prefer. I installed it in D:\Program Files\. 17. Next, select the crack patch we configured earlier – choose the third option, which locks the license file. 18. Select the crack file ptc_licfile (first copy this file to drive D). 19. Start the installation. 20. The installation is complete at this point, but the software cannot be used yet, as an “invalid (inconsistent) license key” error will appear when trying to use it. That’s because M020 now includes file patch cracking; next is the most important part, and it’s actually quite simple to follow my instructions. Now, double-click on ptc.pro engineer.wildfire.4.0.win32-patch. Note that this file contains three items. Choose right! 21. Next, you need to manually select the file that needs to be cracked. 22. The name of the file required for cracking is CGTech.dll; this file should be found in D:\Program Files\proeWildfire 4.0\i486_nt\obj. I searched there for a long time but couldn’t find it. What should I do? But that’s okay; we can create this file ourselves. Right-click and select “Create a new text document,” then rename this document to CGTech.dll. Make sure the file extension is visible – to do this, open “My Computer,” go to “Tools” → “Folder Options” → “View,” and uncheck the option “Hide known file extensions”; this will allow the file extensions to be shown. The yellow-colored error messages should be resolved by looking in the startup directory for file 23. This is the file I created. After creating it, we need to point the cracking files to this new file by selecting it. The files required seem to be cpu_id.exe, dbatchc.exe, dsq.exe, plpf_status.exe, pro_batch, and pro_batch_t. In short, create any files that are needed, then rename them using the same method as before. I won’t list them one by one. After selecting and cracking each one, the task is completed – such a message appears to indicate success! 26. At this point, it can be said that all installations are complete; you can use it by double-clicking. But some users might be using the English version; in that case, it is necessary to create a new environment variable. Right-click on \"My Computer\", select \"Advanced\", then choose \"Environment Variables\". Create a new variable as shown in the diagram, enter the value, and click \"OK\" to complete the installation. Now, begin your journey with Pro/E M020! If anything is unclear, please reply and explain, and I will do my best to answer!