What consequences could this lead to?
Thread Content
The check valve disc in the outlet pipeline of the existing gas compressor keeps hitting the valve, producing loud noises. What possible consequences might this have? Please share your thoughts.
It’s very dangerous! Metal collisions can generate sparks that lead to serious accidents. Action must be taken immediately! ! ! !
1. Prolonged use may cause wear on the sealing surface of the check valve； 2. During fan maintenance or temporary shutdown, when restarting the fan, it is essential to ensure thorough gas displacement to prevent air from entering the system and reaching its explosive limit; otherwise, friction between the valve core and the valve body can generate sparks that may lead to an explosion.
1. The severe case is an explosion. 2. The next issue is the fan being damaged due to pressure buildup. 3. Thirdly, it affects the operation of gas systems.
If left unaddressed, this could lead to an explosion; it is recommended to regularly inspect and replace the valves and fittings in gas systems.
Everyone upstairs, read the question carefully: it’s a gas compressor, not a fan, because no explosion can occur without air. It only affects the operation of the gas compressor and the use of gas by users after the compressor
It can cause the check valve to fail; after the compressor stops operating, gas reflux may occur. If the sealing is inadequate and the gas being transported is toxic, it may lead to gas poisoning accidents
Agree with the view from floor 6; gas will not explode even if there is a flame as long as it is not mixed with oxygen. Otherwise, the electrostatic precipitator would explode countless times!
I think it’s most dangerous when left unattended for a long time, especially while the machine is parked; gas leaking into the machine can cause accidents and pose a risk to both the machine and the safety of the operators.