Anti-mold coating application plan

Thread Content

1. (1) 1. For old walls, newly contaminated walls with mold, and walls that require disinfection, use BIT20 fungicide diluted 100-fold to spray on the walls for disinfection. When spraying the walls, care must be taken to protect the workers; it is forbidden for the chemical solution to come into contact with the human body or be inhaled through the respiratory tract! (2) 2. Use antibacterial putty. The BIT20 preservative can be added to putty at a concentration of 0.5%, thereby turning it into an antibacterial putty. (3) 3. Use anti-mold paint. Mold and algae inhibitors should be added to the anti-mold coating at a concentration of 0.5–2%. (4) 4. Maintain good ventilation inside the premises (in interior walls and basements). Note: The anti-mold coating used in basements should meet grade 0 or higher according to GB1741-79 standards regarding coating anti-mold performance, with an appropriate amount of additive used.