【Daily Question 20090214】Can the power cable and motor cable of an inverter be swapped?
Thread Content
【Daily Question 20090214】Can the power cable and motor cable of an inverter be swapped? What will be the consequences if they are swapped? Summary: It must not be swapped. Swapping them around will damage the inverter. This post was last edited by lihy on 2009-2-14 19:56.]
Swapping is strictly prohibited, as it may damage the internal components.
I don’t understand this field, so I haven’t learned circuit knowledge well either. Personally, I think it’s not possible; at least the specifications are different. Could LZ give some guidance on where to start? Looking forward to it
It must not be swapped. Swapping them around will damage the inverter.
It cannot be swapped. Swapping them around will damage the inverter.
Swapping is strictly prohibited, as it may damage the internal components.
Swapping is strictly prohibited, as it may damage the internal components.
It is prohibited to swap the power supply and motor wires, as this may damage the inverter.
It must not be swapped. Swapping them could potentially burn out the inverter.
It cannot be swapped; swapping it may damage the inverter.
It must not be connected in reverse. Reversing it can cause the integrated circuit to short-circuit, leading to an explosion.
Swapping is prohibited, otherwise the inverter will be damaged.
It cannot be swapped; swapping it may damage the inverter
It cannot be swapped. Swapping them around will damage the inverter.