Layout of ammonia refrigeration compressor room
Thread Content
How is a ammonia refrigeration compressor room typically arranged? Is it single-story or double-story, and are there any specific requirements regarding the height of the building?
It should be arranged in a single layer, with a floor height of around 8 meters. In areas such as the freezing station, the height of the ceiling in the freezing water pump room is 6 meters; it has a frame structure, and evaporative condensers are installed on the roof
It should be arranged in two layers, with a floor height of around 8 meters. The compressor, vacuum pump, and dry gas seal are on the upper floor, while the remaining auxiliary equipment is on the lower floor.
The layout of the ammonia refrigeration compressor plant is related to the selection of the model and the size of the cooling capacity. In the case of centrifugal compressors, which include inter-stage heat exchangers, oil stations, emergency oil tanks, etc., 2 to 3 floors are generally required to meet the installation requirements of such units, with the first floor usually needing a height of around 6 meters ； For screw refrigerators, which are relatively simpler, usually just one layer is sufficient to meet the installation requirements of the unit. This post was last edited by lxq700918 on 2009-2-16 23:14.]