Maximum capacity of the high-quality copper oxide ore stirring leaching tank
Thread Content
Obviously, larger equipment helps improve efficiency, but there should be a limit when considering equipment occupancy, technology, and investment. The question is: how is the optimal volume determined? Also, what is the largest leaching tank currently in use in the industry? What kind of stirring?
First, determine factors such as annual production volume, annual working hours, the minimum grade of raw materials, and moisture content, calculate the daily amount of ore that can be processed, and then consider the size of the equipment； Large-scale mixing equipment does not improve efficiency (have you thought about the time spent on loading and unloading?) The power of the mixer? Leaching time? ). If copper oxide leaching is involved, it is recommended to use a tank with a capacity of 20–40 cubic meters for continuous leaching. This post was last edited by Minyue999 on 2009-2-17 at 18:28.]
However, I cannot agree with the view of scaling up the leaching tanks for gentlemen!
Larger equipment helps improve efficiency. Hehe. Need I say it?
Feeding: An automatic feeding system is used, which is quite simple. If the scale is sufficient, a computer can also be used. No need for people anymore. Isn’t that fast? Stirring power: 20 liters. How much should you use? 40 How much should you use? 100 How much do you use? 200 then? How much more?
200 cubic capacity, 18.5 or 22; it’s been in use for almost two years and there are no major issues. Changchun Prospecting built the largest leaching tank at 10*10.5m.
But could you explain it a bit more clearly? What is leached material? That is, what is used to extract something, and what is the mixing method? If it is mechanical stirring, what is the rotation speed? What size motor should be used? 200 is pretty close to what I had in mind, but I want one with a capacity of 500 – it’s frustrating! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
The specific gravity of the material is 3.2, with 85% passing through -200 mesh; the slurry concentration is 35-40%, and leaching is carried out using dilute acid. Double impeller mechanical stirring, with direct connection to the reducer for power transmission. I forgot the impeller diameter and rotational speed.
I hope the moderator will give more points to post 8! To be honest, after all this time in Shanghai Chuan, there have been some gains. wei*ao355 Thank you. Are there any additional materials? I hope you can offer your guidance! ! ! !