What is the typical amount of FF data at the site?
Thread Content
I would like to ask the experts: what is the typical amount of data for FF in practice? Thank you so much! ! ! ! ! ! ! !
The FF fieldbus is divided into two levels of buses: H1 and H2. H1 uses a fieldbus physical layer that complies with the IEC 61158‑2 standard ； H2 uses high-speed Ethernet for its physical layer. The main electrical characteristics of the physical layer of the H1 fieldbus are as follows: it employs bit-synchronized digital transmission ； The transmission baud rate is 31.25 kb/s ； Driving voltage 9–32VDC ； Signal current ±9mA ； Cable type shielded twisted pair ； The wiring topology can be linear, tree-shaped, star-shaped, or hierarchical ； Cable length is less than or equal to 1900m (without repeaters) ； The length of the branch cable is 30–120 m ； The number of hanging interface devices is 32 or less (when there are no repeaters) ； The number of available repeaters is 4 or less ； Applicable explosion protection methods include intrinsically safe explosion protection methods, etc. It can be calculated using the above data.