How to understand “paving” in a sentence
Thread Content
The heater condensate is drained to the piping system until there is sufficient condensate pressure to push it forward to the Alkylation Reactor Intercooler. What is discussed here is that at the beginning of operation of the heater, the condensate pressure is low, and thus it cannot be sent to the intercooler, which has a higher pressure, to serve as a heat exchange medium； Wait until the condensate pressure rises gradually before sending it to the Intercooler. So what does “paving” mean in this sentence?
It seems to be the lowest liquid level of the condensate. Flows to the intercooler due to the hydrostatic pressure difference of the liquid level
Paving refers to the roads that are paved; here it should be interpreted as the bottom layer
The heater condensate is drained to the ground until there is sufficient condensate pressure to push the condensate flow forward to the Alkylation Reactor Intercooler. Here, “paving” refers to the “ground,” so the entire sentence can be translated as: The heater condensate is drained to the ground, until………….
Understanding road surfaces is the simplest part; it’s just hard to explain the causal relationships involved. So it can be understood as the basic level of the equipment, which serves to somewhat explain that issue of condensate pressure. To spark further discussion
A flowchart for the pasting process will do. This post was last edited by RainWolf on 2009-2-19 at 17:00.]
Paving refers to a road surface made of stone slabs or a concrete surface. What is meant here is to discharge the condensate from the heater directly onto the ground, until the condensate has sufficient pressure to push it toward the automatic temperature regulator of the alkane reactor
Here, “paving” is synonymous with “floor” and “grade”. It’s better to translate it as ‘ground’.
“To the ground: The heater condensate is drained to the paving surface until there is sufficient condensate pressure to push the condensate flow forward to the Alkylation Reactor Intercooler. The heater condensate must be discharged to the ground until its pressure is high enough to propel it toward the alkylation reactor intercooler.