Regarding the selection of transfer pumps
Thread Content
This post was last edited by FLYTOINTER on 2010-7-11 22:56. What size pump and what diameter of pipe should be used for methanol with a flow rate of 100 kg/h? This flow rate is still controlled by a metering pump. Provide the flow rate and head to the supplier, who will give you the specifications for the pump. Your inlet and outlet pipes should be one size larger than those of the pump; of course, it’s best to do the calculations yourself. ——by flytointer
What you’re saying is a bit too general! To calculate accurately and completely the requirements for a pump, it is necessary to know the pressures of the equipment before and after the pump, the liquid level, the location of the equipment, as well as the fittings on the pump pipelines.
You also need to choose based on the distance or height you are transporting it over! ! !
I agree with what was said on floors 2 and 3; you should provide the inlet pressure and head of the pump
For such a small pump, a peristaltic pump can be considered.