How to control the pump outlet flow rate
Thread Content
According to anti-static requirements, the initial flow rate of the pump must be below one meter per second. However, our company does not have equipment such as flow meters; I can only determine the pressure level. In this situation, how can I roughly estimate the flow rate?
It can be calculated based on the pump’s outlet diameter, flow rate, liquid medium, and head.
The problem is I don’t know how to calculate traffic
It’s not possible to calculate this with precision in actual operation; you can make an approximate estimate based on the amount of downstream products processed or produced per hour, without limiting your considerations to just the flow rate in the outlet pipeline
Calculate it by reversing based on the quantity of the product. But generally, safety flow rates are taken into account during design, right?:lol
Ha, we can only control the degree of valve opening based on experience; it seems quite difficult to determine the flow rate with precision
You can control it by adjusting the opening degree of the valve on the outlet pipeline