Anti-corrosion of the ground around the circulation tank
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 20:06. Please give me your advice.: I wonder how the anti-corrosion of the ground around the circulation tank and discharge tank outside your electrolysis plant is? Is it necessary to prevent corrosion on the ground around the resin tower? How to prevent corrosion? This post was last edited by 181128425 on 2009-2-20 11:10 ] # , , &
There is no need for anti-corrosion on the ground around the resin tower. There should be a fence around the lye and salt water circulation tanks.
There are two layers of anti-corrosion around our electrolytic cells. The bottom layer: Glass cloth attached, upper layer: Granite floor tiles with epoxy resin! There is no anti-corrosion around the resin tower, but the trench is the same as the one around the electrolyzer.
There is no anti-corrosion around the electrolyzer and it is not necessary. A trench was built around the resin tower and there was no anti-corrosion.
FJ anti-corrosion is used around the circulation tank. Pay attention to the resin tower when sampling. You can connect the sampled pipe to the trench without anti-corrosion. The electrolysis plant and the trench around the resin tower outside must be anti-corrosion!