Design of high-temperature heat exchangers
Thread Content
It is now necessary to design a heat exchanger with the following requirements: the hot side of the heat exchanger should be exposed to gas at 580 degrees Celsius, while the cold side should have gas at normal temperature; moreover, the gas on the cold side is corrosive (it is very difficult for conventional anti-corrosion coatings to remain effective for a year). I would appreciate advice on how to design such a heat exchanger. Thank you. . . .
I’m only aware of plate exchangers or plate-fin exchangers for gas-to-gas heat exchange, but since the temperature at the hot side is high and the foot pads can’t handle it, a plate-fin exchanger should be used. Refer to manuals for calculations related to heat transfer processes