How to select a fan?
Thread Content
Given the fan’s flow rate, pressure, and motor power, how does one select a fan? What do c500-1.3 and d500-2.3 mean? This post was last edited by jindin312 on 2009-2-20 18:24.]
Insufficient parameters; selection is not possible. The parameters for selecting a fan include flow rate, pressure, operating temperature, the altitude of the location where the fan will be used, and the environmental conditions in which it will operate (including dust levels). The motor is chosen based on these parameters, rather than being a fixed parameter
C500-1.3 refers to a multi-stage low-speed centrifugal blower with a flow rate of 500 m3/min, an inlet pressure of 100,000 Pa (absolute), an outlet pressure of 30,000 Pa, and a main shaft speed of less than 3000 r/min. d500-2.3 refers to a single-suction centrifugal blower with a flow rate of 500 m3/min, an inlet pressure of 200,000 Pa (absolute), and an outlet pressure of 30,000 Pa.
We urgently need the equipment procurement process; please offer your guidance. Thank you!
When the flow rate and pressure of the fan are known, it is possible to select the fan directly; however, attention should be paid to the effect of the local altitude on the fan’s flow rate and head pressure, which can be calculated using the formula PV/T = P1V1/T1