What type of pump is best for materials containing mud, slag, water, and highly viscous oils?
Thread Content
What type of pump is best for materials containing mud, slag, water, and highly viscous oils? This kind of material has a pH value of 11, contains sediment and highly viscous oil, and is mainly composed of water. It requires a flow rate of 40-50 cubic meters per hour and a head of 60-100 meters. What type of pump is best to choose? Please give advice.
I remember there is a mud pump that can meet your requirements. For details, you can go to the place where the pump is sold to inquire! ! !
ZM type slurry pump can meet the requirements!
ZM and AH type slurry pumps can meet the requirements. The owner can consult the technicians of Shijiazhuang Qiangqiang Water Pump Factory.
“This kind of material has a pH value of 11, contains sediment and highly viscous oil, and is mainly composed of water. It requires a flow rate of 40-50 cubic meters per hour and a head of 60-100 meters. What type of pump is best to choose? Please give advice. ” An expert can't talk about it. discuss: 1. The pH value is 11, which seems to be alkaline, and the lift is very high. You can choose an alkali pump from Hangzhou Alkali Pump. 2. You can also choose ceramic or wear-resistant polymer mortar pumps from Zeus Pump Industry. Very easy to use. Your situation is similar to our desulfurization pump. 3. If you want to spend less money, you can also choose a packing-sealed semi-open clean water centrifugal pump. IS80-40-250.
This post was last edited by FLYTOINTER on 2010-7-11 22:57 Can the diaphragm pump meet the requirements? I don’t know if the pump selected above will work. I don’t know if the diaphragm pump will work. The medium containing scum will affect the closing of the inlet and outlet check valves. ——by flytointer