Problems with instrument pressure tubes
Thread Content
What are the specifications for instrument pressure tube connectors? Thank you all. This post was last edited by Chifeng on 2009-2-22 08:24.]
What are the specifications for the gauge director tube bolts? Don’t you understand what the question is asking?
Most have diameters of 18 and 22
It is determined based on your:lol stress level:lol and:victory: medium:victory:. Plastic pipes, latex pipes, sewn pipes, seamless pipes, high-pressure seamless stainless steel pipes, Hastelloy pipes, PVC pipes, RPV pipes, and so on~~~~~~~~~~~~~~~~
It’s F14×3; the medium is different, the material is different, the pressure rating is different, and the wall thickness is different.
Carbon steel pipes are generally 18x3, while white steel pipes are generally 12.
Consider the medium, temperature, and pressure; the material of the pressure transfer tubes and the connectors used vary depending on the operating conditions. Please explain this more clearly
For F10, F12, and F14, as the pressure increases, the wall thickness of the tubes also increases, and the way in which the tubes are connected to each other changes as well.
Thank you all for your answers. What is mainly measured is the pressure in the ash lock of the Luchi furnace; the medium inside is primarily steam, with some ash mixed in as well
Well, it depends on the pressure of the medium being measured; a seamless steel pipe with Ф14×2 dimensions will suffice!