Operation issues of the flasher
Thread Content
I would like to ask some questions regarding the operation of the flash tank. Under normal circumstances, the operation of a flash tank involves adiabatic flashing, or it may be operated at specified temperatures and pressures. I would like to ask how these two methods of operation are chosen? And how is it achieved to operate the flasher at specified temperature and pressure? Is there external heat exchange?
Adiabatic flash: A liquid feed with known flow rate, composition, pressure, and temperature (or enthalpy) is throttled to a lower pressure, resulting in partial vaporization. Adiabatic flash calculation: Determine the flash temperature as well as the vapor and liquid phase compositions and flow rates. Isothermal flashing: I. The vapor-liquid equilibrium constant is independent of composition. The bubble point temperature and dew point temperature of the feed mixture at the flashing pressure are calculated using the bubble point equation and the dew point equation respectively, and then it is checked whether the flashing temperature lies between these bubble and dew point temperatures. II. Flash calculation related to composition using vapor-liquid equilibrium constants