About the Vibration Meter
Thread Content
Use a handheld vibrometer (Times TV260 model) to detect the vibration of the equipment. Is the measured speed a valid value? Is the measured displacement peak-to-peak?
General vibration meters are like this.
Vibration meter functions: 1. Times TV260 pen-type vibration meter is used for vibration measurement of motors, fans, pumps, compressors, machine tools and other equipment, and for preventive inspection of mechanical equipment failures. ； 2.Measurement data retention function ； 3. Automatic shutdown function ； 4. Automatic switching of three parameters for measurement ； 5. Single button control, simple operation ； 6. Low power consumption. Function: 1. Times TV260 pen-type vibration detector is used for vibration detection and measurement of motors, fans, pumps, compressors, machine tools and other equipment, and for preventive inspection of mechanical equipment failures. ； 2.Measurement data retention function ； 3. Automatic shutdown function ； 4. Automatic switching of three parameters for measurement ； 5. Single button control, simple operation ； 6. Low power consumption. Technical parameters 1. Measurement parameters: Acceleration, velocity, displacement. 2.Measurement range: acceleration: 0.01mm/s2-199.9mm/s。 speed: 0.1mm/s-199.9mm/s。 Displacement: 0.001mm-1.999mm。 3. Frequency range: acceleration: 10Hz-1kHz。 speed: 10Hz-1kHz。 Displacement: 10Hz-500Hz。 4.Display mode: 3.5-digit LCD display, display period is about 1s. 5.Power supply: 2 button batteries (LR44 or SR44). 6.Battery life: Works continuously for about 4.5 hours. 7. Dimensions: 150mm×22mm×18mm. 8. Overall machine weight: About 55g (including two batteries).