Thread Content
About the treatment of circulating water: Hello everyone, I am * * As the director of the water treatment workshop of a chemical company, after many years and bold time experience, I have summed up some good suggestions. In the past, the circulating water in our unit could not meet the standards. No matter whether we added medicine or used a good filter, the effect was not obvious, and there was often corrosion and scaling. Later, I tried to find two people to use shovels to remove the fungi and other things in the cooling tower every day. After that, our circulating water suddenly passed the standard, and there was no corrosion or scaling, and there was no corrosion or scaling. * * Save the potions. Another thing is that we used to operate according to the operating procedures, but the exit doors always cracked or were damaged to varying degrees. Later, I tried to stop the pump first and then close the exit door. * * The impact of water on the exit door was reduced, and the exit door never broke again.
Thank you. It is worth learning from. The method is simple and effective.
The water in our factory and production is also not good, the temperature is 25-30 degrees high, and it is a bit alkaline. Like the moderator, we have to find someone to fish it out, but we really have to fish it out every day, otherwise it won’t work! The moderator is such a thoughtful leader!