Atlas air compressor
Thread Content
Which friend is using Atlas screw air compressors? Could you tell me how to calculate the air production volume of these compressors?
You don’t need to calculate the inflation volume. Manufacturers have a range of products; after the customer informs the supplier of the required flow rate and outlet pressure, the model is determined together in accordance with standards. So, all you need to do is inform the ATLAS agent to come and discuss it. Generally, screw compressors with a capacity of around 40 M3/MIN are the most mature, though there are also models with higher capacities. It’s around 80M3, and there are many users of American Sulzer products. The fuel injection ratio is higher than that without fuel. For volumes over 100 M3, high-speed centrifuges can be considered; oil-free models from brands such as Elliott also offer excellent performance. For screw compressors, you can go to the “Compressor Network” to exchange information; there is a lot of content there.
You can install a first-class orifice plate on the outlet pipeline and connect it to the DCS; this way, you can monitor the flow rate over the long term and assess the performance of this air compressor