Will a liquid ring pump meet the process requirements?
Thread Content
The pressure at the inlet is 0.3 MPa, and at the outlet it is 0.9 MPa. The process medium is flammable and explosive, containing some HCl gas; carbon deposition can occur easily in this medium at high temperatures. The flow rate of the process medium is approximately 2000 standard cubic meters. Is there a liquid ring pump that can meet such process requirements?
Under normal conditions, when the outlet pressure is higher than 0.15 MPa, an inlet liquid ring pump is generally chosen. One of the advantages of liquid ring pumps is their ability to handle flammable and heat-sensitive media, although their efficiency is somewhat lower