Pressure vessel verification and registration issues
Thread Content
I would like to ask experts: How often does a gas tank that stores compressed air need to be inspected? What are the test items? What procedures are required for the registration process? This post was last edited by sonov on 2009-2-27 10:10 ]
Please refer to: You will understand the relevant contents in the "Pressure Vessel Safety Technical Supervision Regulations" and "In-use Pressure Vessel Inspection Regulations".
"Pressure Vessel Safety Technical Supervision Regulations" (99 Edition) Regulations: Article 114 Before the following pressure vessels are installed, the installation unit or user unit shall declare the name, quantity, manufacturing unit, user unit and installation location of the pressure vessel to the safety supervision agency in the place where the pressure vessel is registered, and go through the installation procedures.: 1. Category III pressure vessels. 2. Pressure vessels with a volume greater than or equal to 10m3. 3. Steam balls. 4.... Article 117 The user of a pressure vessel shall, before the pressure vessel is put into use, go to the safety supervision agency or authorized department to apply for a usage registration manual on a unit-by-unit basis in accordance with the requirements of the "Pressure Vessel Usage Registration Management Rules". As for the issue you mentioned about the years of inspection of gas storage tanks, Chapter 6 of the "Capacity Regulations" also has comprehensive regulations, which mainly look at the safety status level, whether it is a newly put into use pressure vessel, etc. For more detailed content, it is recommended to read the "Rules of Appearance" and "Rules of Inspection" yourself. This post was last edited by gmdyes on 2009-2-27 11:37 ]
Then add: 1. According to the provisions of Article 6 of the "Registration and Management Measures for the Use of Boiler and Pressure Vessels": “Before each boiler and pressure vessel is put into use or within 30 days after it is put into use, the user should apply to the local registration authority for registration and obtain a use registration certificate. ” 2. Article 7 of the "Administrative Measures" stipulates the technical documents required to be submitted for use registration. 3. According to Article 133 of the "Content Regulations": “The first internal and external inspection period after being put into use is generally 3 years. ” 4. For specific items of annual inspection and comprehensive inspection of pressure vessels, please refer to the relevant provisions of TSG R7001-2004 "Periodic Inspection Rules for Pressure Vessels".