Help with platform issues!
Thread Content
Platforms are installed on top of the tower for operational purposes. But when what is the distance between the two platforms, is it necessary to have an intermediate platform between them? When creating platforms on standard equipment, what should be the minimum distance between the two platforms?
This needs to be determined through process design, piping design, and overall layout planning~~~ After the relevant specialized teams submit their requirements, the equipment team can proceed with the next stage of platform design work. However, the ladders for general platforms are usually made by manufacturing factories, and there is no difficulty involved in this, nor are any mandatory standards required. You can consult professionals in these areas. This post was last edited by www557 on 2009-2-27 10:54]
However, when the distance between the two platforms, that is, the height of the inclined ladder, exceeds 4 meters, a resting platform about 600–800 mm long needs to be installed as a transition between the two platforms. For platforms built on ordinary equipment, the distance between the two platforms should be at least 1.8 m, and the width of the platform must be no less than 0.6 m. This post was last edited by www557 on 2009-2-28 at 21:50.]
Create a platform on the device; the first issue needs to be determined based on the circumstances: 1. For straight ladders, a rest platform is generally provided every 7.5 meters.2 For inclined ladders, a transition platform or turn is usually provided every 4 meters. As for the second issue, the distance between two platforms should be such that the clear height from the top of the lower platform to the bottom of the upper platform is greater than 2.2 meters. If it is necessary to install an operation and maintenance platform in an area with a very small height difference, paired platforms at staggered angles can be used ； Or add small steps, small straight ladders, etc., on the platform. :L :L :L