To design a small water treatment device, what are the finished drawings and documents required?
Thread Content
Now, to design a small water treatment unit, what documents and drawings are required according to standard procedures? What standards are generally needed for reference? Anyone who has experience in chemical plant design, please offer some advice. I’m quite confused right now; I’ve only worked on drawings for heat exchangers and storage tanks before, and I’ve never carried out a full-scale plant design from start to finish. I hope experts will kindly share their knowledge with me. Thank you!
The original poster wants to design the entire device by themselves, right?:victory: Amazing! The design of a device involves numerous specialized fields. Just considering the piping discipline alone, the following tasks need to be carried out: 1. Design specifications ； 2. Homepage image, process flow diagram ； 3. Equipment List ； 4. Equipment layout diagram ； 5. Pipe Naming Table (Pipe Property Table) ； 6. Pipeline layout diagram ； 7. Piping single-line diagram ； 8. Pipe section material list and comprehensive material list ； 9. Special Fittings Data Sheet ； 10. Pipe Support Table ； 11. Pipeline hydraulic calculation sheet (pipeline stress calculation sheet), etc.
The reply from the first floor was very sincere and professional; it seems like someone who is an experienced designer with plenty of experience. Thank you!