Please ask an expert to help calculate the diameter of the stirring shaft and the motor power for this equipment

Thread Content

Technical parameters of the hydrolysis tank: 1. Total volume: 50 m3; inner cylinder dimensions: DN3400×4300. 2. Basic design parameters: Design pressure inside the tank (operating pressure) –0.1～1.3 Mpa (–0.09～1.0 Mpa)； Design temperature (operating temperature): 192.4℃ (180℃) 3. Material properties: Weight percentage of each component: p-xylylene chloride 27.4%, caustic soda 14.9%, water 57.7% ； Mixed viscosity 1.1471 cp ； Mixed density: 1197kg/m3 ； Loading factor 70% ； 4. Mixing speed: 85 r/min 5. Type of mixing blades: top-to-bottom, folding blade type DN1600 (downward) + folding blade type DN1600 (downward) + folding blade type DN2000 (downward) + folding blade type DN2000 (downward) + folding blade type DN2200 (upward); distance from the mixing blades to the bottom: 3500 mm, 2750 mm, 2000 mm, 1250 mm, 500 mm ； 6. Frame and shaft seal: A double-support elevated frame is used, along with a type 206 double-face elevated mechanical seal. 7. Other requirements: No baffle plates inside. 8. Material of the shaft impeller: Carbon steel. Calculations required: Diameter of the stirring shaft and motor power