How to make four towering lines into a whole frame?
Thread Content
It seems like the problem is very weak, heroes, please give me some advice.
If you make these 4 lines into a block, it will automatically form a whole frame.
Friends upstairs, please tell me the specific steps. Thank you.
Use the "Modify > Object > Polyline" command to convert it into a polyline, and then select "Join" as prompted to turn the four lines into a whole.
Another method is to select the four lines and create a block in the block operation, so that the four lines become an overall frame.
Create a block 1. Click Create Block 2. Click to select the object, four lines 3. Pick a name 4. Pick a point 5. Confirm that the four lines are successfully combined as a whole frame
You can use GROUP, BLOCK and PEDIT to realize your idea.
The most convenient way is to use the PE command to change the straight line into multiple line segments, which can solve this problem!
The easiest way is to select 4 lines, then copy them on the toolbar, and then paste them. This way it becomes a whole, no need to build blocks.
Enter "pe" on the command line, which is the polyline editing command, and select these four lines to become a whole.