Let’s discuss the starting pressure of dry gas seals
Thread Content
Nowadays, the use of dry gas seals for compressors or pumps in petrochemical plants has become very common. During the use, I found that the dry gas seals used in the units of various manufacturers require different starting pressures for the dry gas seals. Please discuss the opening pressure of the dry gas seals used by each manufacturer. Before the introduction, please use the following format to let everyone know about the dry gas seal you use.: Unit medium pressure primary seal air seal air flow chain value seal groove form seal starting pressure seal manufacturer
I have been posting for several days, but there is no response from Haiyou, so I will start by throwing some light on it. Unit medium pressure primary seal gas seal air flow chain value seal groove form seal starting pressure seal manufacturer 6.3MPa medium gas 93NM3/HT type groove 13 kg Clan