Vacuum distillation packed tower design
Thread Content
It is used to purify ethanol. The feed is light alcohol and is in a vacuum state. I want to design a distillation tower. I don't know if there is any relevant information. I have found many but not very good designs on vacuum distillation. I hope someone can give me some advice. Thank you.
Vacuum systems and heating systems are relatively common.
I don’t know what purpose the poster wants to achieve. If you want to obtain pure ethanol, ordinary distillation is impossible to achieve your purpose (not even vacuum distillation).
Vacuum is a requirement for the entire process, during which there is a distillation process to purify the alcohol to 80-90%. It’s just that it’s hard to find information on vacuum distillation now. If anyone has an example, can you share it so we can learn from it? * one time. Thanks
You need professionals to calculate it. I guess you don’t dare to rely on the information sent here to make equipment. Are you sure? Does your boss dare to use it? hehe!
This field is relatively mature, so you don’t need to put too much thought into it. The key is that it is easier to operate with experienced designers.
This is a commonly used equipment for stereotypes. Just buy it directly from the equipment manufacturer.
It seems that the design requirements are not perfect. Now the distillation tower design technology is very mature. There are many distillation tower design software. You can directly input the parameter results and output them. Then use the calibration software to see if the strength is enough and then further design demonstration is OK.
The internal parts factory or packing factory can provide you with detailed and reliable calculations, and provide you with tower diameter, tower height and tower internal parts design based on your processing capacity and accuracy requirements.