Urgent: There’s another problem with installing PROII
Thread Content
Urgent: There’s another problem with PROII – this issue occurs when trying to open PROII 8.0: “Cannot find license file” (-1,359:2 “No such file or directory”). I need help urgently! ! ! ! ! ! Thank you
It’s strange to me that my PRO II is only 2.44m long – it can’t be that short, right?
Copy flxlm72.dl from the Crack folder within the installation files to the installation directory, replacing the existing file.
The lic or crack is not installed properly
Options to use during installation: flexlm 7.2 or flexlm 9.5 to replace the original old files with flxlm72.dll and flxlm95.dll files. Both files are available in: C:\Program Files\SIMSCI\SIMSCICFI10\bin and: C:\Program Files\SIMSCI\SIMSCICFI20\bin!
It is best to install it on Drive C; select Flex 7.2 during the installation process. After installation and restart, replace Flex 7.2 in the Bin folder with Flex 7.2 from the crack file.
2.44M definitely has a problem; I don’t know how you managed to install it – it should be at least 100M or more. :lol
2.44M in size is definitely too small; mine is over 600M for version 8.1. The problem might lie in the installation folder. The information provided regarding my installation files is for reference only~~ I hope this helps. “1. Create a flexlm directory on Drive C. 2. Copy ipassi.lic to C:\flexlm. 3. Run SETUP to begin installation.”； 4. During installation, select the flexlm 7.2 option ； 5. Enter c:\flexlm in the “value of environment variable:” field until the installation is complete. 6. Copy the cracked files from the MAGNiTUDE folder to C:\Program Files\SIMSCI\SIMSCICFI10\bin\ and C:\Program Files\SIMSCI\SIMSCICFI20\bin\. 7. Run SETUP located in the \PROII81 patches folder to apply the patch; this will change PROII8.1 to PROII8.1.1. 8. Once installation is complete, you can run PROII8.1 as indicated on the page”