I would like to ask you guys about piping.

The Petrochemical Pipeline Design Manual is a book that you can read if you are a beginner in piping. Also, if your colleague has a piping diagram and wants him to give it to you, follow the process and check the piping one by one, and think more about why he drew it like this.

I have just started working in this industry, and it has been a year and a half now. I think piping is not difficult, but it requires learning. * There are many more, as the person on the second floor said, you must know why they are so matched. Anyway, read more and learn more from the masters. * That’s right~ If you don’t understand the place, just ask~

Every design institute should have a piping manual, so you can learn from it* Just a moment! In addition, there are specifications: GB50316, HG20549, SH3011, etc. are all available!

Be diligent in learning and ask questions from colleagues around you. There is no other trick.

Piping is not difficult but doing it well is difficult

recommend: The Process Pipeline Installation Design Manual is a very good book. It is very useful for beginners. If you want to improve as soon as possible, it is recommended to go to the site to cooperate with the construction. Only by understanding the conditions on site can you know what kind of piping can be done best.

In addition to reading some piping books and understanding relevant standards and specifications, and humbly asking for advice, there are other things: 1. Understand PID, the role of each pipeline, that is, understand the process flow, process operations and medium characteristics. 2. On the basis of the above, understand the process of piping design, that is, provide conditions such as structure, equipment, etc., and these conditions are related to your piping. 3. Piping also needs to be counter-conditioned to the process, that is, increased low discharge, etc. 4 It is best to go to the site to cooperate with the construction after the design is completed and understand the design in an all-round way. In short, piping design is a tedious job that requires patience and carefulness. Design, like other work, requires a high sense of responsibility and perseverance. After several projects, it will definitely get better and better!

Piping is not difficult, but it takes at least 5 to 6 years to do it well. If you want to improve it, it will be faster.: 1. Study diligently. This includes reading more manuals, regulations, and norms, asking more advice from veteran comrades, being good at summarizing, and looking at more on-site photos. Of course, it is best to go to the sites more often. ； 2. Think more.

The original poster is like me. I have just started piping work, but I am mainly limited to the piping of skids and living buildings. In my spare time, I was exposed to some process calculations, including calculations of safety valve containers and control valves. It is actually not easy to do piping work well. In some of the pipelines I designed, collision problems and selection errors occurred. I will often use my weekends to go to the site to look at the projects I am doing, to understand the suggestions of the master workers and project management personnel on the pipeline, and then make corrections after returning. Sometimes, after going through a project, the best way is to summarize it and think about what you have learned, where you have made mistakes, how you should avoid these mistakes, and how you can continue to learn. * . I feel that as long as I work hard, use more time after get off work to read information, and try to contact some completed projects myself, I can do a good job in piping! In my opinion, mastering knowledge is the first important thing. Instead learn * Many design software ignore basic learning * And training is the biggest taboo!