Analysis of temperature variations in reduced exhaust gases
Thread Content
During the reduction process, as the reaction time increases, the temperature of the reduced exhaust gases rises gradually. However, when the ratio of hydrogen to TCS is not appropriate, the temperature of the reduced exhaust gases changes significantly. What should be done when the exhaust gas temperature drops?
The main focus is on controlling the temperature of the reduction furnace, as well as the temperature on the surface of the silicon core.
Currently, the main thing that is controlled is the temperature of the silicon rods inside the reduction furnace; I haven’t heard of any control system for the temperature of the exhaust gases. I’m not sure if what the original poster is referring to is the control method currently in use
To control the temperature of the silicon core, that is, the temperature inside the furnace