HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Problems with the Itai furnace

2009-03-04View Original

Thread Content

I heard there was an accident during the heating process at Yitai. Does anyone know what happened? One really has to be careful when working in the chemical industry!
Reply #22009-03-04
If the furnace goes out during the heating up process in the vaporization furnace, the fuel gas must be cut off promptly, and the system should be kept under negative pressure for at least 5 minutes (in practice, gas analysis is often not carried out) before attempting to restart the ignition
Reply #32009-03-04
If the flame goes out during the heating process of the gasifier, the gas valves should be closed immediately, the steam valve should be opened slightly, and the extraction rate increased for 5–10 minutes. Care must be taken to ensure that the furnace temperature does not change too much. After that, the flame should be restarted to raise the temperature back to its level before the flame went out, and the temperature should then be raised further in accordance with the heating curve.
Reply #42009-03-05
During the furnace heating process, a flameout can occur; in such cases, air needs to be used for replacement. It is necessary to conduct analyses to confirm that everything is in order before attempting to restart the flame. One must not start the furnace again without conducting any analyses after replacing the air based on experience alone – details determine success or failure
Reply #52009-03-05
Backfire occurred during the heating of the furnace in Yitai, and the personnel on site tripped over pipelines while evacuating, resulting in casualties. It should be noted that backfires do occur during furnace heating, but they should not cause injuries or deaths. There are some issues with management!
Reply #62009-03-05
Oh, it’s that serious? To what extent has the accident occurred? I haven’t heard any details yet; I guess oil is leaking now? ?
Reply #72009-03-06
I think the problem lies in the usual management; working in the chemical industry requires strictness as it is a matter of responsibility towards oneself as well as others
Reply #82009-03-06
It is said that there were casualties, but no public reports have appeared! I hope it’s fine.
Reply #92009-03-06
Keep an eye on it~ I wonder if Yitai has started operations successfully yet?
Reply #102009-03-06
An explosion accident occurred in a furnace due to liquefied petroleum gas entering, similar to what happens in a vaporization furnace.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.