Pressure issues
Thread Content
(1) The system pressure of sulfur should be adjusted using the control panel located after the exhaust furnace. What is the typical setting for the opening degree of this control panel in various installations? (2) Does opening the valve too wide cause a pressure imbalance before and after the system? What impact will it have? (3) What is the system pressure at the moment? (Please include the air supply volume for reference.) The current opening angle of the rear baffle in our furnace is 30 degrees, the system pressure is 0.9 kg, and the air supply volume is 500 m3. I hope everyone will study together! ! ! ! ! ! ! ! ! ! ! ! ! :handshake :handshake
:L :L :L No one is stepping up – do you think pressure isn’t important? It can reflect many issues.
Generally, the pressure is kept below 50 kPa; if the pressure is too high, approaching or exceeding the outlet pressure of the sulfur production fan, it will cause difficulties in air distribution and affect the normal operation of the plant.
(1) The system pressure of sulfur should be adjusted using the control panel located after the exhaust furnace. What is the typical setting for the opening degree of this control panel in various installations? It should be fully open. (2) Does opening it too much cause a pressure imbalance before and after the system? What impact will it have? Basically no impact. (3) What is the system pressure at the moment? (Please include the air supply volume for reference.) The current opening angle of the rear baffle in our furnace is 30 degrees, the system pressure is 0.9 kg, and the air supply volume is 500 m3. The system pressure of the device is related to the load; generally, 80% of the cases fall within the range of 37–40 KPA. The pressure of the sulfur system is the most important means for monitoring the operation of the equipment