Questions about several fatty acids and fatty acid derivatives.

Chemical Safety Data Sheet Part 1: Chemicals and corporate logos Chinese names of chemicals: Common name or trade name of oleic acid chemical: English name of octadecenoic acid chemical: oleic acid;octadecenoic acid company name: address: email address: post code: Technical specification code: Effective date: Enterprise emergency hotline ( * * or area code)(area code)(telephone number): Fax number ( * * or area code)(area code)(telephone number): * * emergency phone: Molecular formula: C18H34O2 Part 2: Ingredients/composition information √Concentration of hazardous ingredients in pure product mixture CAS NO Oleic acid 112-80-1 Part 3: Dangerous Goods Overview Hazard Category: Invasion route: Inhalation, ingestion, transdermal absorption. health hazards: It is irritating to the respiratory tract and can cause gastrointestinal discomfort if taken in large quantities. Irritating to eyes and skin. environmental hazards: It is harmful to the environment and can cause pollution to water bodies. Fire and explosion hazard: This product is flammable, suspected carcinogen, and irritating. Part 4: First aid measures Skin contact: Take off contaminated clothing and rinse with plenty of running water. eye contact: Lift your eyelids and rinse with running water or saline. Seek medical attention. inhalation: Leave the scene quickly and get to fresh air. Keep your airway open. If breathing is difficult, give oxygen. If breathing stops, perform artificial respiration immediately. Seek medical attention. ingest: Drink enough warm water to induce vomiting. Seek medical attention. Part 5: Hazard characteristics of fire protection measures: Combustible in case of open flame or high heat. Can react with oxidizing agents. If exposed to high heat, the internal pressure of the container will increase and there is a risk of cracking and explosion. Hazardous combustion products: Carbon monoxide, carbon dioxide. Fire extinguishing methods: Firefighters must wear filter gas masks (full face masks) or isolation respirators, wear full-body fire-proof and gas-proof clothing, and put out fires in the upwind direction. Move containers away from the fire to an open area if possible. * * Keep the fire container cool until the fire is extinguished. Containers in a fire scene must be evacuated immediately if they change color or if there is sound from the safety pressure relief device. fire extinguishing agent: Mist water, foam, dry powder, carbon dioxide, sand. It is not suitable to use water. Part Six: emergency spill response emergency actions: Quickly evacuate personnel in the leaked contaminated area to a safe area, isolate them, and strictly restrict access. Cut off the fire source. It is recommended that emergency responders wear self-contained breathing apparatus and general work clothes. Do not come into direct contact with spilled material. Cut off the source of the leak as much as possible. Prevent it from flowing into sewers, flood ditches and other restricted spaces. small leak: Absorb with sand, vermiculite or other inert material. massive leaks: Build dikes or dig pits for containment. Use a pump to transfer it to a tanker or special collector, and recycle or transport it to a waste treatment site for disposal. Part 7: Handling and storage Handling precautions: Closed operation to provide adequate local exhaust. Prevent vapors from leaking into the workplace air. Operators must undergo special training and strictly abide by operating procedures. It is recommended that operators wear self-priming filter gas masks (full face masks), tape gas-proof clothing, and rubber gloves. Keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Welding, cutting and other operations cannot be carried out before the liquid and vapor are removed. Avoid generating smoke. Avoid contact with oxidizing agents. Equipped with corresponding varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may contain harmful residues. Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. Keep container tightly sealed. They should be stored separately from oxidizing agents and avoid mixed storage. It should not be stored for a long time to avoid deterioration. Equipped with corresponding varieties and quantities of fire-fighting equipment. The storage area should be equipped with emergency release equipment and suitable containment materials. Part Eight: Exposure control/individual control maximum allowable concentration: ChinaMAC: maximum allowable concentration: Soviet MAC: Monitoring methods: engineering controls: Tightly sealed and provide adequate local exhaust. respiratory protection: When the concentration in the air exceeds the standard, a self-priming filter gas mask (full face mask) must be worn. During emergency rescue or evacuation, air respirators should be worn. eye protection: Respiratory system protection has been implemented. body protection: Wear tape protective clothing. hand protection: Wear rubber gloves. Other protection: Smoking, eating and drinking are prohibited at the work site. After work, take a shower * * . maintain good hygiene * used. Part 9: Physical and chemical characteristics Appearance and properties: Colorless to light yellow oily liquid. Ph value: Melting point(℃): 14 Relative density (water=1): 0.8910 boiling point (℃): 360.0 relative density (air=1): No data Saturated vapor pressure (kPa): 0.133(176.5℃) Heat of combustion (Kj/mol): No data critical temperature (℃): No data critical pressure (MPa): No data available Partition coefficient octanol/water: No data available Flash point (℃): 188.9 Ignition temperature (℃): 362.8 lower explosion limit: No data explosion limit: No data available Minimum ignition energy (mJ): No data available Maximum explosion pressure (MPa): No data available Solubility: Insoluble in water, miscible in alcohol and ether, soluble in benzene and chloroform. Main purpose: Used for making soap, lubricants, flotation agents, ointments and oleates, etc. Part 10: Stability and reactivity stability: Stable polymerization hazards: Conditions to avoid contact: Incompatible materials: Strong oxidizing agent. Decomposition products: Part 11: Toxicological information Acute toxicity (LD50): No informationLC50: No data on irritation: human transdermal: 15mg/3 days, moderate stimulation. rabbit eye: 100mg, mild irritation. Sensitization: mutagenicity: Teratogenicity: Part 12: Ecological information Ecotoxicity: biodegradability: Non-biodegradability: Other harmful effects: This substance is harmful to the environment, and special attention should be paid to the pollution of water bodies. Part Thirteen: Waste disposal Nature of waste: Disposal methods: It is recommended to use controlled incineration or safe burial. Reuse containers where possible or bury them in designated locations. Disposal precautions: Part 14: Transport Information Dangerous Goods Number: No information UN number: No information packaging mark: No information on packaging category: Z01 Packaging method: No data available. Transportation precautions: During railway transportation, the dangerous goods assembly table in the "Dangerous Goods Transport Rules" of the Ministry of Railways should be strictly followed. Before transportation, check whether the packaging container is complete and sealed. During transportation, make sure that the container does not leak, collapse, fall, or be damaged. It is strictly prohibited to mix and transport with oxidants, edible chemicals, etc. Transport vehicles and ships must be thoroughly cleaned and disinfected, otherwise no other items may be transported. When shipping, the assembly location should be away from bedrooms and kitchens, and isolated from the engine room, power supply, fire sources, etc. When transporting by road, follow the prescribed route and do not stay in residential areas and densely populated areas. Part 15: regulatory information regulatory information: "Regulations on the Safety Management of Hazardous Chemicals" (State Council Order No. 344) "List of Dangerous Goods" (GB12268-2005) "Classification and Name Numbers of Dangerous Goods" (GB6944-2005) "Regulations on the Preparation of Safety Technical Data Sheets of Hazardous Chemicals" (GB16483-2000) "Classification and Labeling of Commonly Used Hazardous Chemicals" (GB13690-92) Part 16: References for additional information: Form filling time: Form filling department: Data review unit: Modification instructions: Other information:

Azelaic Acid Chemical Safety Data Sheet (MSDS) Part 1: Chemical name Chemical name in Chinese: English name of azelaic acid chemical: azelaic acid Chinese alias: English alias: Technical specification code: Molecular formula: C 9 H 16 O 4 molecular weight: 188.22 Part 2: Ingredients/Composition InformationMain Ingredients: Pure CAS No.: 123-99-9 Part 3: Hazard Summary Hazard Category: Invasion route: health hazards: It is irritating to the skin, eyes, mucous membranes and upper respiratory tract, and is harmful to the body if inhaled or ingested. environmental hazards: Fire and explosion hazard: Part 4: First aid measures Skin contact: Take off contaminated clothing and rinse with plenty of running water. eye contact: Lift your eyelids and rinse with running water or saline. Seek medical attention. inhalation: Leave the scene to fresh air. If breathing is difficult, give oxygen. Seek medical attention. ingest: Drink enough warm water to induce vomiting. Seek medical attention. Part 5: Hazardous characteristics of fire protection measures: Powder and air can form an explosive mixture. When it reaches a certain concentration, it will explode when encountering Mars. It decomposes under high heat and releases irritating smoke. Hazardous combustion products: Fire extinguishing methods: Move containers away from the fire to an open area if possible. fire extinguishing agent: Mist water, foam, dry powder, carbon dioxide, sand. Precautions and measures for fire extinguishing: Part Six: Accidental leakage measuresEmergency measures: Isolate the leaked contaminated area and restrict access. Cut off the fire source. It is recommended that emergency responders wear dust masks (full face masks) and protective clothing. Avoid raising dust, sweep it up carefully, put it in a bag and transfer it to a safe place. If there is a large amount of leakage, cover it with plastic sheeting or canvas. Collect and recycle or transport to waste disposal site for disposal. Part 7: Handling and storage precautions: Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, reducing agents and alkalis, and avoid mixed storage. Equipped with corresponding varieties and quantities of fire-fighting equipment. Suitable materials should be available in the storage area to contain spills. Part Eight: Exposure Controls/Personal Protection Maximum Allowable Concentrations: China MAC: No standard has been established ； Former Soviet Union MAC: No standard monitoring method developed: engineering controls: Closed operation, local exhaust. respiratory protection: When the dust concentration in the air is high, it is recommended to wear a self-priming filter dust mask. eye protection: Wear chemical safety glasses. body protection: Wear protective coveralls. hand protection: Wear chemical-resistant gloves. Other protection: After work, take a shower * * . Pay attention to personal hygiene. Get regular physical exams. Part 9: Physical and chemical properties Appearance and properties: Colorless to light yellow crystal or crystalline powder. PH: Melting point(℃): 106.5 Boiling point (℃): 286.5(13.3kPa) relative density (water=1): 1.03 (20℃) relative vapor density (air=1): 6.5 Saturated vapor pressure (kPa): 0.13(178.3℃) Heat of combustion (kJ/mol): No data critical temperature (℃): No data critical pressure (MPa): No data available Log value of octanol/water partition coefficient: No data available Flash point (℃): No data available Ignition temperature (℃): No data. Explosion upper limit % (V/V): No data available Lower explosion limit% (V/V): No data available Solubility: Slightly soluble in cold water, soluble in hot water, ether, and easily soluble in ethanol. Main purpose: Used as a plasticizer and used in alkyd resins, paints and chemical synthesis. Other physical and chemical properties: Part 10: Stability and reactivity stability: Conditions to avoid contact: Incompatible materials: Alkali, oxidizing agent, reducing agent. Aggregation Hazard: Decomposition products: Part 11: Toxicological information acute toxicity: LD50: No information, LC50: No data available Subacute and chronic toxicity: irritating: Sensitization: mutagenicity: Teratogenicity: Carcinogenicity: other: Part 12: Ecological Information Ecotoxicological Toxicity: biodegradability: Non-biodegradability: bioconcentration or bioaccumulation: Other harmful effects: Part Thirteen: Waste disposal Nature of waste: Disposal methods: Please refer to the * * and local regulations. It is recommended to dispose by incineration. Disposal precautions: Part 14: Transport Information Dangerous Goods Number: No information UN number: No information packaging mark: Packaging category: Z01 Packaging method: No data available. Transportation precautions: Part 15: Regulatory Information Domestic Chemical Safety Management Regulations: The Regulations on the Safety Management of Chemical Hazardous Materials (issued by the State Council on February 17, 1987), the Implementation Rules of the Regulations on the Safety Management of Chemical Hazardous Materials (Hua Lao Fa No. 677), and the Regulations on the Safe Use of Chemicals in the Workplace (Ministry of Labor Fa No. 423) and other regulations have made corresponding provisions on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.

Erucamide Chemical Safety Data Sheet (MSDS) Part 1: Chemical name Chemical name in Chinese: The English name of the chemical erucamide: erucamide Chinese alias: English alias: Technical specification code: Molecular formula: C 22 H 43 NO molecular weight: 337.59 Part 2: Ingredients/Composition InformationMain Ingredients: Pure CAS No.: 112-84-5 Part 3: Hazard Summary Hazard Category: Invasion route: health hazards: At present, there are no reports of occupational poisoning. environmental hazards: Fire and explosion hazard: Part 4: First aid measures Skin contact: Take off contaminated clothing and rinse with running water. eye contact: Lift your eyelids and rinse with running water or saline. Seek medical attention. inhalation: Leave the scene to fresh air. ingest: Drink enough warm water to induce vomiting. Seek medical attention. Part 5: Hazardous characteristics of fire protection measures: Combustible in case of open flame or high heat. Powder and air can form an explosive mixture. When it reaches a certain concentration, it will explode when encountering Mars. Hazardous combustion products: Fire extinguishing methods: Move containers away from the fire to an open area if possible. fire extinguishing agent: Mist water, foam, dry powder, carbon dioxide, sand. Precautions and measures for fire extinguishing: Part Six: Accidental leakage measuresEmergency measures: Isolate the leaked contaminated area and restrict access. Cut off the fire source. It is recommended that emergency responders wear dust masks (full face masks) and protective clothing. Use a clean shovel to collect in a dry, clean, covered container and transfer to a safe place. If there is a large amount of leakage, collect it for recycling or transport it to a waste disposal site for disposal. Part 7: Handling and storage precautions: Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants and acids, and avoid mixed storage. Equipped with corresponding varieties and quantities of fire-fighting equipment. Suitable materials should be available in the storage area to contain spills. Part Eight: Exposure Controls/Personal Protection Maximum Allowable Concentrations: China MAC: No standard has been established ； Former Soviet Union MAC: No standard monitoring method developed: engineering controls: Provide good natural ventilation. respiratory protection: When the dust concentration in the air exceeds the standard, it is recommended to wear a self-priming filter dust mask. eye protection: Wear chemical safety glasses. body protection: Wear protective coveralls. hand protection: Wear chemical-resistant gloves. Other protection: Change and wash work clothes promptly. maintain good hygiene * used. Part 9: Physical and chemical properties Appearance and properties: Mild smelling solid. PH: Melting point(℃): 75-80 Boiling point (℃): No data available Relative density (water=1): 0.89 Relative vapor density (air=1): No data available Saturated vapor pressure (kPa): No data available Heat of combustion (kJ/mol): No data critical temperature (℃): No data critical pressure (MPa): No data available Log value of octanol/water partition coefficient: No data available Flash point (℃): No data available Ignition temperature (℃): No data. Explosion upper limit % (V/V): No data available Lower explosion limit% (V/V): No data available Solubility: Slightly soluble in ethanol and propylene glycol. Main purpose: Used as lubricant, separating agent, anti-sticking agent and internal release agent for thermoplastic plastics. Other physical and chemical properties: Part 10: Stability and reactivity stability: Conditions to avoid contact: Incompatible materials: Strong oxidants, strong acids. Aggregation Hazard: Decomposition products: Part 11: Toxicological information acute toxicity: LD50: No information, LC50: No data available Subacute and chronic toxicity: irritating: Sensitization: mutagenicity: Teratogenicity: Carcinogenicity: other: Part 12: Ecological Information Ecotoxicological Toxicity: biodegradability: Non-biodegradability: bioconcentration or bioaccumulation: Other harmful effects: Part Thirteen: Waste disposal Nature of waste: Disposal methods: Please refer to the * * and local regulations. It is recommended to dispose by incineration. Nitrogen oxides from the incinerator are removed through scrubbers. Disposal precautions: Part 14: Transport Information Dangerous Goods Number: No information UN number: No information packaging mark: Packaging category: Z01 Packaging method: No data available. Transportation precautions: Part 15: Regulatory Information Domestic Chemical Safety Management Regulations: The Regulations on the Safety Management of Chemical Hazardous Materials (issued by the State Council on February 17, 1987), the Implementation Rules of the Regulations on the Safety Management of Chemical Hazardous Materials (Hua Lao Fa No. 677), and the Regulations on the Safe Use of Chemicals in the Workplace (Ministry of Labor Fa No. 423) and other regulations have made corresponding provisions on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.

Oleic acid amide chemical safety data sheet Table of contents Part 1 Chemical name Part 9 Physical and chemical properties Part 2 Composition/composition information Part 10 Stability and reactivity Part 3 Hazard overview Part 11 Toxicological information Part 4 First aid measures Part 12 Ecological information Part 5 Firefighting measures Part 13 Disposal Part 6 Leakage emergency treatment Part 14 Transport information Part 7 Handling and storage Part 15 Regulatory information Part 8 Exposure control/personal protection Part 16 Other information Part 1: Chemical Name Back to Catalog Chemical Name in Chinese: English name of oleic acid amide chemical: 9-octadeceneamide Chinese name 2: Oleamide English name 2: Oleamide Data Sheet Code: 1366 CAS No.: 3322-62-1 Molecular formula: C18H35ON molecular weight: 281.5 Part 2: Ingredients/composition information Back to catalog Hazardous ingredient content CAS No. Oleic acid amide 3322-62-1 Part 3: Hazard SummaryBack to Table of ContentsHazard Categories: Invasion route: health hazards: There are currently no reports of occupational poisoning. environmental hazards: Fire and explosion hazard: This product is flammable and irritating. Part 4: First Aid Measures Back to Table of Contents Skin Contact: Take off contaminated clothing and rinse with running water. eye contact: Lift your eyelids and rinse with running water or saline. Seek medical attention. inhalation: Leave the scene to fresh air. If breathing is difficult, give oxygen. Seek medical attention. ingest: Drink enough warm water to induce vomiting. Seek medical attention. Part 5: Firefighting MeasuresBack to CatalogHazardous Characteristics: Combustible in case of open flame or high heat. Hazardous combustion products: Carbon monoxide, carbon dioxide, nitrogen oxides. Fire extinguishing methods: Firefighters must wear gas masks and full-body firefighting suits and fight fires in the upwind direction. fire extinguishing agent: Mist water, foam, dry powder, carbon dioxide, sand. Part Six: Emergency Response to Spills Back to Table of Contents Emergency Response: Isolate the leaked contaminated area and restrict access. Cut off the fire source. It is recommended that emergency responders wear dust masks (full face masks) and protective clothing. Mix with sand, dry lime or soda ash. Sweep up carefully. If there is a large amount of leakage, cover it with plastic sheet or canvas. Collect and recycle or transport to waste disposal site for disposal. Part 7: Precautions for operation, disposal and storage back to directory: Closed operation, local exhaust. Operators must undergo special training and strictly abide by operating procedures. It is recommended that operators wear self-priming filter dust masks, chemical safety glasses, anti-toxic substance penetration overalls, and rubber gloves. Keep away from fire and heat sources. Smoking is strictly prohibited in the workplace. Use explosion-proof ventilation systems and equipment. Avoid dust generation. Avoid contact with oxidizing agents. When handling, load and unload with care to prevent damage to packaging and containers. Equipped with corresponding varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment. Empty containers may contain harmful residues. Storage precautions: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidizing agents and avoid mixed storage. Equipped with corresponding varieties and quantities of fire-fighting equipment. Suitable materials should be available in the storage area to contain spills. Part Eight: Exposure Control/Personal Protection Back to Catalog Occupational Exposure Limit China MAC (mg/m3): No standard has been established for the former Soviet Union MAC (mg/m3): No standard TLVTN has been established: No standard TLVWN has been established: No standard monitoring method has been developed: engineering controls: Closed operation, local exhaust. respiratory protection: When the dust concentration in the air exceeds the standard, a self-priming filter dust mask must be worn. During emergency rescue or evacuation, air respirators should be worn. eye protection: Wear chemical safety glasses. body protection: Wear protective coveralls. hand protection: Wear rubber gloves. Other protection: Smoking, eating and drinking are prohibited at the work site. After work, take a shower * * . maintain good hygiene * used. Part 9: Physical and chemical properties Back to catalog Main ingredients: Pure product appearance and properties: White flake or powdery solid. pH: Melting point(℃): 72-76 Boiling point (℃): No data available Relative density (water=1): No data available Relative vapor density (air=1): No data available Saturated vapor pressure (kPa): No data available Heat of combustion (kJ/mol): No data critical temperature (℃): No data critical pressure (MPa): No data available Log value of octanol/water partition coefficient: No data available Flash point (℃): 210 Ignition temperature (℃): 235 Explosion upper limit% (V/V): No data available Lower explosion limit% (V/V): No data available Solubility: Soluble in homo, ester, ethanol, ether, insoluble in water. Main purpose: Used as slip agent, antistatic agent, pigment and dye dispersant, printing ink additive, coating typing and copying compounding agent, and fiber oil agent for polyethylene and polypropylene blown films. Other physical and chemical properties: Part 10: Stability and ReactivityBack to Table of ContentsStability: Incompatible materials: Strong oxidizing agent. Conditions to avoid contact: Aggregation Hazard: Decomposition products: Part 11: Toxicology information back to table of contents Acute toxicity: LD50: No informationLC50: No data available Subacute and chronic toxicity: irritating: Sensitization: mutagenicity: Teratogenicity: Carcinogenicity: Part 12: Ecological information back to catalog Ecotoxicology Toxicity: biodegradability: Non-biodegradability: bioconcentration or bioaccumulation: Other harmful effects: No data available. Part Thirteen: Waste DisposalBack to CatalogWaste Nature: Disposal methods: Please refer to the * * and local regulations. It is recommended to dispose by incineration. Nitrogen oxides from the incinerator are removed through scrubbers. Disposal precautions: Part 14: Transport Information Back to Catalog Dangerous Goods Number: No information UN number: No information packaging mark: Packaging category: Z01 Packaging method: No data available. Transportation precautions: When shipping, the packaging should be complete and the loading should be secure. During transportation, make sure that the container does not leak, collapse, fall, or be damaged. It is strictly prohibited to mix and transport with oxidants, edible chemicals, etc. During transportation, they should be protected from exposure to the sun, rain, and high temperatures. Vehicles should be thoroughly cleaned after transportation. Part 15: Regulations and Information Back to Table of Contents Regulations and Information Regulations on the Safety Management of Chemical Dangerous Goods (issued by the State Council on February 17, 1987), Implementation Rules of the Regulations on the Safety Management of Chemical Dangerous Goods (Hua Lao Fa No. 677), Regulations on the Safe Use of Chemicals in the Workplace (Ministry of Labor Fa No. 423) and other regulations have made corresponding provisions for the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods.

Which factory are you from? Our factory is a manufacturer that mainly produces erucic acid, oleic acid, erucamide and other products. Please communicate with us. Information on oleic acid and erucic acid can be found in the "Handbook of Fatty Acids and Their Deep Processing", which is very comprehensive. I didn't upload it successfully due to the large size of the file. As for amides, I'm craving them too.

Our main products are similar to yours! In fact, friends from Tianyuan Chemical should be able to guess which company I belong to! hehe! At the same time, thank you all for your help!