What are the commonly used standards for pressure vessel design?
Thread Content
The company has asked me to gather standards related to pressure vessel design. What are they? I only know some of the common ones; I don’t really understand much about materials or welding. I thank my friend from Sichuan.
Regarding the standards for materials, the standard numbers and names are listed in the referenced standards within GB150-98 \"Steel Pressure Vessels\"； Regarding welding materials, we have GB/T5117 \"Carbon steel electrodes\", GB/T5118 \"Low-alloy steel electrodes\", GB983 \"Stainless steel electrodes\", GB4242 \"Stainless steel wires for welding\", GB/T8110 \"Carbon steel and low-alloy steel wires for gas shielded arc welding\", GB10045 \"Carbon steel flux-cored wires\", GB/T14957 \"Wires for fusion welding\", GB14958 \"Wires for gas shielded welding\", GB5293 \"Carbon steel wires and fluxes for submerged arc welding\", among others.
GB150-98, GB151-1999 – basic standards; JB4732-95, JB/T4735-1997, GB12337-1998, JB4710-2000
There are mainly the following categories: 1. Laws and regulations: Regulations on the Safety Supervision of Special Equipment, relevant technical standards, etc. 2. Design-related standards: GB150, GB151, GB12337, JB/T4710, JB/T4731, JB/T4732, etc. 3. Welding-related standards: JB4708, JB/T4709, JB4744. 4. Material-related standards: GB713, GB3531, GB19189, etc. 5. Inspection-related standards: JB/T4730. 6. Other standards: JB/T4711, GB/T8923. 7. Parts-related standards: JB/T4700–4707, JB/T4736, JB/T4746, HG20592–20635, etc