Why do the blocks disappear all at once when I try to decompose them? Please advise, experts
Thread Content
Why do the blocks disappear all at once when I try to decompose them? Please advise, experts
Check whether the elements in the decomposed blocks are on the frozen layer.
The original poster uploads the problematic drawings so that others can see what the problem is. This situation generally does not occur.
If the properties of the block have been defined, it’s better to clarify the question.
What was said on the 2nd floor makes sense. Generally, the content is placed on layer “0” before defining the block.
I’ve never encountered this before; let’s come in and see what the reason is
I’ve encountered similar situations too. The standard frame borders I copied were drawn as a single rectangle; to make them longer, I had to break down the frame, and after that the thick lines turned into thin lines. I don’t know why Please give me your advice
The decomposed blocks are on another layer; it seems that this layer is frozen, which is why this situation occurs.
Its thick lines were drawn using the PL command; they are polylines, and they become thin lines when broken down. If you want to lengthen it, you don’t need to break apart the frame; just use the stretch command, s. Give it a try yourself.