How to translate along a straight line
Thread Content
How to translate along a straight line, not horizontally or vertically. Please give guidance
What is the concept of translation? What is the object being translated? Isn't the poster talking about the move command? In any case, you can use lisp to turn off orthogonality, select a straight line, and get the angle of the straight line.
If you use relative coordinates in the command, you should be able to implement it.
The offset command o seems to have been mentioned before http://bbs.hcbbs.com/viewthread.php?tid=394388&extra=page%3D6%26amp%3Bfilter%3D0%26amp%3Borderby%3Ddateline%26amp%3Bascdesc%3DDESC There are similar
1. Press "Object Capture" at the bottom of the screen. 2. Right-click the mouse in the object capture and select "Settings". 3. Select "Nearest Point" in the dialog box and click "OK". 4. Enter "m" on the keyboard and press Enter. 5. Select the line to be moved and press Enter. 6. Click a base point of the line, and then click another position of the line to be moved. 7. Complete.
Click the midpoint of the straight line and you can translate directly.
Thank you, I solved the problem this way
Thank you for your answers. I would like to express my gratitude to the newbies.
Is it moving parallel to a straight line? Just press F8 to move.