Standards for aligning the coke oven trolleys
Thread Content
How can the accuracy of the positioning of the heavy vehicles be ensured during the coke oven production process? 1. Is it necessary to confirm the alignment markers before starting up the coke oven? Master the alignment standards through the operational skills of the workers. 2. If it is a large vehicle equipped with an interlocking device, could you please explain to me how the interlocking mechanism works? Since I have just started studying this field, I hope the teachers can offer me a lot of help. Thank you for your explanations!
At first, for each batch we had people check the alignment, while also using markings on the vehicle and the furnace body to ensure proper alignment. Not long after operation began, four linked vehicles were put into use; the alignment deviation of the coke pusher, coke stopper, and coal feeder was kept within ±5 mm, while that of the electric locomotive was within ±200 mm. The sequence of operations is as follows: first, confirm the alignment of the coke car, then give a signal to the coke quenching car ； After the coking car is aligned, a signal is given to the heavy haul truck and the coking stopper car (at this point, the doors of the coking car and the heavy haul truck are opened) ； The heavy vehicle pushes the coke after receiving the signal. This post was last edited by Jin Yusi on 2009-3-10 at 12:59.]