Exhaust gas absorption tower calculation
Thread Content
Exhaust gas absorption tower calculates intake air volume: 15000m3/h wind pressure: 600Pa air temperature: 35~45 degrees Celsius exhaust gas components: Ammonium salt powder amount 6.33mg/m3 Exhaust components after washing: The amount of ammonium salt powder is 0.39mg/m3. Considering the environmental protection requirements of the factory, the wastewater discharge of the device shall not exceed 0.80 tons/day. The molecular weight of ammonium salt is 186. The viscosity is 10cp. The solubility in water at 25 degrees Celsius is 50g/100g of water. Can anyone help me with the calculation? I would be very grateful.
It is recommended that you provide these parameters to the equipment manufacturer, and they will help you choose a good model.
The leader asked me to come up with a calculation book. It’s difficult.
If you have studied chemical engineering, you will find "Chemical Engineering Unit Process and Equipment Curriculum Design", which has detailed process calculations and mechanical calculations.
What to calculate? Didn't make it clear. Is it a specification? If it involves a lot of data, check the information yourself. After you calculate it, I will help you see if it is correct.