About pipeline pumps
Thread Content
In a heat transfer oil heating system I’m working with, a pump with a head of 20M and a flow rate of 200M3/h is required. Is there any suitable magnetic drive pump that can withstand temperatures of 300 degrees? Please help me find suitable models as well as manufacturers.
Shanghai Tiantian Pump Manufacturing Co., Ltd. also offers pipeline magnetic pumps (25CG1.6-32). Product overview » I. Product features This pump is a new type of pipeline pump developed on the basis of horizontal magnetic pumps; it combines the advantages of magnetic pumps with those of pipeline pumps, and its vertical installation requires less space. II. Model Description
25CG1.6-32
25 ---- Inlet and outlet diameter (mm)
CG ---- Pipeline-type magnetic pump
1.6 ---- Flow rate (m3/h)
32 ----- Head (m)
III. Product Performance
Material: Stainless steel
Flow rate: 1.6–100 m3/h
Head: 12.5–80 m
Power: 0.75–45 kW
Maximum operating temperature: Up to 100°C
Rotational speed: 2900 r/min
IV. Components
This pump consists of a pump body, impeller, impeller nut, rotating ring, stationary ring, bearing housing, positioning sleeve, bearings, thrust ring, inner rotor assembly, coupling frame, front anti-loosening washer, seal ring, isolation sleeve, pump shaft, and rear anti-loosening washer, among other components. V. Other models: 25CG1.6-12.5, 25CG1.6-20, 25CG1.6-32, 32CG3.2-12.5, 32CG3.2-20, 32CG3.2-32, 40CG6.3-12.5, 40CG6.3-2, 40CG6.3-32, 40CG6.3-50, 50CG12.5-20, 50CG12.5-3, 50CG12.5-50, 50CG12.5-80. Company name: Wenzhou Andeli Acid-Resistant Pump Co., Ltd. Last edited by hhbwwy on 2009-3-10 at 15:59
25CG1.6-32
25 ---- Inlet and outlet diameter (mm)
CG ---- Pipeline-type magnetic pump
1.6 ---- Flow rate (m3/h)
32 ----- Head (m)
III. Product Performance
Material: Stainless steel
Flow rate: 1.6–100 m3/h
Head: 12.5–80 m
Power: 0.75–45 kW
Maximum operating temperature: Up to 100°C
Rotational speed: 2900 r/min
IV. Components
This pump consists of a pump body, impeller, impeller nut, rotating ring, stationary ring, bearing housing, positioning sleeve, bearings, thrust ring, inner rotor assembly, coupling frame, front anti-loosening washer, seal ring, isolation sleeve, pump shaft, and rear anti-loosening washer, among other components. V. Other models: 25CG1.6-12.5, 25CG1.6-20, 25CG1.6-32, 32CG3.2-12.5, 32CG3.2-20, 32CG3.2-32, 40CG6.3-12.5, 40CG6.3-2, 40CG6.3-32, 40CG6.3-50, 50CG12.5-20, 50CG12.5-3, 50CG12.5-50, 50CG12.5-80. Company name: Wenzhou Andeli Acid-Resistant Pump Co., Ltd. Last edited by hhbwwy on 2009-3-10 at 15:59
It seems that the unit upstairs doesn’t have the flow rate and head I need, and the temperature is still below 100 degrees