Could you please tell me how to calibrate the prawn float level transmitter alone?
Thread Content
I heard that it is a water-based method. I would like to ask the experts for advice on how to do it.
You can understand it by looking at the following example: The process response is that an electric float level meter is inaccurate and needs to be recalibrated after inspection. Its measurement range is 2 meters, the measured density of heavy medium is 0.8g/cm3, and the measured density of light medium is 0.6g/cm3. What is the process of calibrating the meter with water? answer: a. Contact technology, manual cutting with adjustment loop, and temporary release of interlocking. b. Close the upper and lower stop valves, open the drain valve, and discharge the residual medium. Note that the stop valve must be closed. c. Irrigate 1.6m and calibrate the measuring range. d. Irrigate 1.2m of water and calibrate the zero point. e. Repeat the adjustment many times. f. Correct use.