The e-book \"Carbon Anodes for Aluminum\" is needed

Thread Content

【Table of Contents】 The Development Prospects of the World Aluminum Market Ulrich Mannweiler (Internal publication by RDC, 1994) Production of petroleum coke: delayed coking and calcination Ulrich Mannweiler (Internally distributed by RDC, 1994) The influence of calcination parameters on the quality of petroleum coke Werner K. Fischer, Raymond C. Perruchoud (Light Metals, 1985, 811–824) The effect of sodium on the reactivity of calcined coke and anodes Raymond C. Perruchoud, Werner K. Fischer (Light Metals, 1991, 581–584) The influence of sulfur content in petroleum coke on the sodium sensitivity of carbon anodes Sheralyn S. Hume, W. K. Fischer, R. C. Perruchoud, James B. Metson, R. Terry Baker (Light Metals, 1993, 535–542) Measurement and study of the reaction properties of petroleum coke with gases Sheralyn M. Hume, W. K. Fischer, R. C. Perruchoud, Barry J. Welch (Original version in Light Metals, 1993, 525–534) Measurement of the stability and grindability of aggregate coke particles and their impact on pastes Raymond C. Perruchoud, Werner K. Fischer (Original version in Light Metals, 1992, 695–700) Evaluation of petroleum coke properties through intermediate anode tests Werner K. Fischer, Raymond C. Perruchoud (Internal publication by RDC, 1992) Measurement of the reactivity of carbon anodes used in aluminum production and their raw material gases S. M. Hume, R. C. Perruchoud, and W. K. Fischer (February 1994) Test methods for evaluating the properties of calcined coke used in anodes Werner K. Fischer, Raymond C. Perruchoud (Internal publication by RDC, 1993) New trends in binder coal tar used for anodes Nigel R. Turner Methods for measuring the properties of coal tar Raymond C. Perruchoud (Internal publication by RDC, 1992) Selection of the amount of tar to be used through intermediate tests Wemer K. Fischer, Raymond C. Perruchoud (Internal publication by RDC, 1992) Laboratory evaluation of the influence of particle size on the properties of the bonding matrix and anodes Mark A. Smith, R. C. Perruchoud, W-K; Fischer, Barry J.; Welch, J. (Light Metals, 1991, 651–656) The influence of sodium content in asphalt and anode residues on the anode bonding matrix. Mark A. Smith, R.C. Perruchoud, W.K. Fischer, Barry J. Welch (original publication in Light Metals, 1991, 593–596) Studying the wettability of asphalt for cokes using simple caking tests. Werner K. Fischer, Raymond C. Perruchoud (RDC internal publication, 1993) Practical applications of plastic deformation recorders for measuring torque in laboratory bonding matrices. Werner K. Fischer, Raymond C. Perruchoud (RDC internal publication, 1993) Methods for determining anode residue properties. Ulrich Mannweiler, Raymond C. Perruchoud (RDC internal publication, 1994) One of the foundations of modern anode carbon block production??An overview. Ulrich Mannweiler (RDC internal publication, 1994) Another foundation of modern anode production??New technologies. Ulrich Mannweiler, Felix Keller (internal publication, February 1994) Yet another foundation of modern anode production??Information for decision-makers. Felix Keller, Ulrich Mannweiler, Egon Knall (ARABAL 1993, Cairo, Egypt) Rapid pilot-scale testing techniques when raw materials change??Dynamic optimization techniques. Urs Bühler, Raymond Perruchoud (Light Metals, 1995) New roasting furnace technology from Swiss company RDC for producing high-quality anodes. R. Engelsmann, Aluchemie Rotterdam, P. Sornmer, ALESA Alusuisse-Engineering Zurich (original publication at the International Symposium, Edmonton 1992) Production control in heavy oil roasting furnaces. Ulrich Mannweiler, Stefan Oderbolz, Peter Sulzberger (Light Metals, 1991) The impact of changing roasting parameters on improving anode quality. Peter Sulzberger, Comalco (Bell Bay) Ltd. (from papers presented at the 4th Australian Aluminium Industry Technology Symposium, 1992). October of that year) Roasting parameters and anode quality W. K. Fischer, F. Keller, R. C. Perruehoud, S. Oderbolz (Light Metals, 1993, 683–694). Health care for workers and environmental protection in anode production plants F. Keller, R. Engelsman, A. A. Kooijman, Dr. W. Schmidt. Published in Light Metals in 1989, revised in 1994. Investigation into waste and pollutant treatment in anode production plants Felix Keller (Light Metals, 1994, 599–608). Appendix 1: Typical analysis of the composition of wastes during anode production. The effect of low current density on anode performance Sheralyn M. Hume, Mark R. Utley, Barry J. Welch, Department of Chemical and Materials Engineering, University of Auckland, New Zealand. Raymond C. Perruchoud, R&D Carbon Ltd., CH-3960 Sierre, Switzerland. Thermal shock resistance of anodes – a problem that has been solved Markus W. Meier, Werner K. Fischer, Raymond C. Perruchoud. Original version published in Light Metals, 1994, 685–694. The relationship between net carbon consumption of anodes and cell design, operating parameters of cells, as well as anode performance Werner K. Fischer, Felix Keller, Raymond C. Perruchoud (Light Metals, 1991). Quality index of anodes Felix Keller. The relationship between residual performance and the quality of roasted anodes Werner K. Fischer, Raymond C. Perruchoud. Original version published in Light Metals, 1991, 721–724. Using empirical formulas to predict net carbon consumption of anodes Zeno de Mori (Light Metals, 1993). Performance of anodes: The relationship between the properties of petroleum coke and aluminum production costs Felix Keller, Ulrich Mannweiler, Raymond C. Perruchoud (Internal publication, 1994). This post was last edited by wwzz on 2009-3-12 at 21:48