Hydrogenation unit selection
Thread Content
Now there is a hydrogenation reaction with a pressure of 0.2MPa and palladium carbon as a catalyst. What type of hydrogenation equipment is better?
Your reaction pressure is only 0.2MPa. Considering the strength, ordinary 20# steel is enough. I don’t know what your process medium is and what the temperature is. These conditions are not available. I don’t know how to choose?
You don't have any specific parameters, so it's difficult to give a pressure condition. However, it is best to use a mature process that you are more confident about, which is easier to produce results. Choose whichever process is more mature, such as fixed bed, fluidized bed, or vulcanized bed.
If it is a solid-catalyzed gas-liquid two-phase reaction, and if there is no acid corrosion, you can consider a self-priming reactor! !
0.2mpa hydrogenation, does the process temperature require a relatively high level? The poster should be more detailed.
Positive pressure comes in. Can it be called hydrogenation if the pressure is so low?